Search Unity

Unity 5.3.2f1 application launch after build problem on Tizen 2.3.1 and Tizen 2.4.0

Discussion in 'Tizen' started by bbartel84, Feb 8, 2016.

  1. bbartel84

    bbartel84

    Joined:
    Feb 8, 2016
    Posts:
    25
    Hello,

    I am deploying a sample project using Unity 5.3.2f1 with a Unity Pro license both on Tizen 2.3.1 and 2.4 (rev3) . And I am having an issue.

    I am following docs at http://docs.unity3d.com/Manual/tizen-setup.html

    I did all the steps above and the project builds, the project compiles. It even deploys to a Tizen device via USB. All works fine and without a problem.

    But lastly when I try to run it on the device nothing happens. The icon of the application is there. I touch it. The project launches but nothing shows up. You can see that the process is running on the Tizen device in the process list. But no actual view is showing up.

    Did anyone had this issue? And if yes, how you have resolved it?

    Thanks in advance and best regards.
     
  2. Masterfalcon

    Masterfalcon

    Unity Technologies

    Joined:
    Dec 29, 2014
    Posts:
    362
    MrEsquire and bbartel84 like this.
  3. bbartel84

    bbartel84

    Joined:
    Feb 8, 2016
    Posts:
    25
    Thank you for your help :). It is working now. Both on Z1 and Z3.