Discussion Character Controller and Movement Issues

I have used several different tutorials and even gone as far as purchasing a coding book. Been attempting on and off since July to even get a simple cylinder or block to move. Starting to think maybe the issue is I am using the free version or an outdated version of unity downloaded? (2021.3.16f1)
I was also informed you no longer need w,a,s,d key inputs in the script because its built into the input manager.
After flawlessly copying many youtube videos and tutorials, double checking for capitalization and even each line of code is on the same as tutorials, copying and pasting the exact code used as well.

I CANT get anything to move... at all.. horizontal, vertical, anything. Can anyone else?

Yes, attaching Character Controller to object.
Yes, naming objects as "player" or "character" following guides
Yes, naming script as "character controller" or "playermovement"
Yes, being careful to capitalize where needed, as well as spacing
Yes, I am hitting the play button
Yes, I have checked the Input Manager to ensure the w,a,s,d were on the negative/positive lines

I have followed several simple tutorials to the T. Using these 2 as examples of MANY:
(Used these specifically because they were 2+ years old)

 

This seems unlikely. Did you do these two simple steps?

Tutorials and example code are great, but keep this in mind to maximize your success and minimize your frustration:

How to do tutorials properly, two (2) simple steps to success:

Step 1. Follow the tutorial and do every single step of the tutorial 100% precisely the way it is shown. Even the slightest deviation (even a single character!) generally ends in disaster. That's how software engineering works. Every step must be taken, every single letter must be spelled, capitalized, punctuated and spaced (or not spaced) properly, literally NOTHING can be omitted or skipped.

Fortunately this is the easiest part to get right: Be a robot. Don't make any mistakes.
BE PERFECT IN EVERYTHING YOU DO HERE!!

If you get any errors, learn how to read the error code and fix your error. Google is your friend here. Do NOT continue until you fix your error. Your error will probably be somewhere near the parenthesis numbers (line and character position) in the file. It is almost CERTAINLY your typo causing the error, so look again and fix it.

Step 2. Go back and work through every part of the tutorial again, and this time explain it to your doggie. See how I am doing that in my avatar picture? If you have no dog, explain it to your house plant. If you are unable to explain any part of it, STOP. DO NOT PROCEED. Now go learn how that part works. Read the documentation on the functions involved. Go back to the tutorial and try to figure out WHY they did that. This is the part that takes a LOT of time when you are new. It might take days or weeks to work through a single 5-minute tutorial. Stick with it. You will learn.

Step 2 is the part everybody seems to miss. Without Step 2 you are simply a code-typing monkey and outside of the specific tutorial you did, you will be completely lost. If you want to learn, you MUST do Step 2.

Of course, all this presupposes no errors in the tutorial. For certain tutorial makers (like Unity, Brackeys, Imphenzia, Sebastian Lague) this is usually the case. For some other less-well-known content creators, this is less true. Read the comments on the video: did anyone have issues like you did? If there's an error, you will NEVER be the first guy to find it.

Beyond that, Step 3, 4, 5 and 6 become easy because you already understand!

Finally, when you have errors, don't post here... just go fix your errors! Here's how:

Remember: NOBODY here memorizes error codes. That's not a thing. The error code is absolutely the least useful part of the error. It serves no purpose at all. Forget the error code. Put it out of your mind.

The complete error message contains everything you need to know to fix the error yourself.

The important parts of the error message are:

- the description of the error itself (google this; you are NEVER the first one!)
- the file it occurred in (critical!)
- the line number and character position (the two numbers in parentheses)
- also possibly useful is the stack trace (all the lines of text in the lower console window)

Always start with the FIRST error in the console window, as sometimes that error causes or compounds some or all of the subsequent errors. Often the error will be immediately prior to the indicated line, so make sure to check there as well.

Look in the documentation. Every API you attempt to use is probably documented somewhere. Are you using it correctly? Are you spelling it correctly?

All of that information is in the actual error message and you must pay attention to it. Learn how to identify it instantly so you don't have to stop your progress and fiddle around with the forum.

If you have done stuff and it didn't work, you can find your error via debugging. Here's how to get started:

You must find a way to get the information you need in order to reason about what the problem is.

Once you understand what the problem is, you may begin to reason about a solution to the problem.

What is often happening in these cases is one of the following:

- the code you think is executing is not actually executing at all
- the code is executing far EARLIER or LATER than you think
- the code is executing far LESS OFTEN than you think
- the code is executing far MORE OFTEN than you think
- the code is executing on another GameObject than you think it is
- you're getting an error or warning and you haven't noticed it in the console window

To help gain more insight into your problem, I recommend liberally sprinkling

Debug.Log()

statements through your code to display information in realtime.

Doing this should help you answer these types of questions:

- is this code even running? which parts are running? how often does it run? what order does it run in?
- what are the values of the variables involved? Are they initialized? Are the values reasonable?
- are you meeting ALL the requirements to receive callbacks such as triggers / colliders (review the documentation)

Knowing this information will help you reason about the behavior you are seeing.

You can also supply a second argument to Debug.Log() and when you click the message, it will highlight the object in scene, such as

Debug.Log("Problem!",this);

If your problem would benefit from in-scene or in-game visualization, Debug.DrawRay() or Debug.DrawLine() can help you visualize things like rays (used in raycasting) or distances.

You can also call Debug.Break() to pause the Editor when certain interesting pieces of code run, and then study the scene manually, looking for all the parts, where they are, what scripts are on them, etc.

You can also call GameObject.CreatePrimitive() to emplace debug-marker-ish objects in the scene at runtime.

You could also just display various important quantities in UI Text elements to watch them change as you play the game.

If you are running a mobile device you can also view the console output. Google for how on your particular mobile target, such as this answer or iOS: https://forum.unity.com/threads/how-to-capturing-device-logs-on-ios.529920/ or this answer for Android: https://forum.unity.com/threads/how-to-capturing-device-logs-on-android.528680/

If you are working in VR, it might be useful to make your on onscreen log output, or integrate one from the asset store, so you can see what is happening as you operate your software.

Another useful approach is to temporarily strip out everything besides what is necessary to prove your issue. This can simplify and isolate compounding effects of other items in your scene or prefab.

Here's an example of putting in a laser-focused Debug.Log() and how that can save you a TON of time wallowing around speculating what might be going wrong:

https://forum.unity.com/threads/coroutine-missing-hint-and-error.1103197/#post-7100494

When in doubt, print it out!(tm)

Note: the

print()

function is an alias for Debug.Log() provided by the MonoBehaviour class.

 

Yes, I have followed about 13 different guides on scripts for character controllers. STEP BY STEP. literally every single upper/lower case letter matching. Every ( { * = . to the T. Multiple times... deleting, retrying with a fresh script. I even tried using Chat GPT to generate a script as well. literally nothing will work. I have back tracked and triple checks coding to match the exact tutorials. I can copy and paste the exact scrips from any of the videos I have watched for reference if needed.
This has to be something else causing this issue. Trust me when I say I have exhausted all options attempting to figure out what is going on.
I have even gone as far as deleting and redownloading Unity to attempt to see if there is a bug.

 

Here's a repository full of various ways of moving:

proximity_buttons is presently hosted at these locations:

https://bitbucket.org/kurtdekker/proximity_buttons

https://github.com/kurtdekker/proximity_buttons

https://gitlab.com/kurtdekker/proximity_buttons

https://sourceforge.net/projects/proximity-buttons/

If you would prefer something more full-featured here is a super-basic starter prototype FPS based on Character Controller (BasicFPCC):

https://forum.unity.com/threads/a-basic-first-person-character-controller-for-prototyping.1169491/

That one has run, walk, jump, slide, crouch... it's crazy-nutty!!

 

If you have the new Input System installed, it usually by default disables the old input system. It's possible this setting was changed, it should be somewhere in the Project Settings.

 

Here is on example: If anyone can tell me whats off or I am doing wrong, I would love the help.

 

As stated above, it may be necessary for you to debug your setup.

Studying walls of code and watching a TWENTY MINUTE video does NOT replace debugging.

START by learning how to debug your code.

You must find a way to get the information you need in order to reason about what the problem is.

Once you understand what the problem is, you may begin to reason about a solution to the problem.

What is often happening in these cases is one of the following:

- the code you think is executing is not actually executing at all
- the code is executing far EARLIER or LATER than you think
- the code is executing far LESS OFTEN than you think
- the code is executing far MORE OFTEN than you think
- the code is executing on another GameObject than you think it is
- you're getting an error or warning and you haven't noticed it in the console window

To help gain more insight into your problem, I recommend liberally sprinkling

Debug.Log()

statements through your code to display information in realtime.

Doing this should help you answer these types of questions:

- is this code even running? which parts are running? how often does it run? what order does it run in?
- what are the values of the variables involved? Are they initialized? Are the values reasonable?
- are you meeting ALL the requirements to receive callbacks such as triggers / colliders (review the documentation)

Knowing this information will help you reason about the behavior you are seeing.

You can also supply a second argument to Debug.Log() and when you click the message, it will highlight the object in scene, such as

Debug.Log("Problem!",this);

If your problem would benefit from in-scene or in-game visualization, Debug.DrawRay() or Debug.DrawLine() can help you visualize things like rays (used in raycasting) or distances.

You can also call Debug.Break() to pause the Editor when certain interesting pieces of code run, and then study the scene manually, looking for all the parts, where they are, what scripts are on them, etc.

You can also call GameObject.CreatePrimitive() to emplace debug-marker-ish objects in the scene at runtime.

You could also just display various important quantities in UI Text elements to watch them change as you play the game.

If you are running a mobile device you can also view the console output. Google for how on your particular mobile target, such as this answer or iOS: https://forum.unity.com/threads/how-to-capturing-device-logs-on-ios.529920/ or this answer for Android: https://forum.unity.com/threads/how-to-capturing-device-logs-on-android.528680/

If you are working in VR, it might be useful to make your on onscreen log output, or integrate one from the asset store, so you can see what is happening as you operate your software.

Another useful approach is to temporarily strip out everything besides what is necessary to prove your issue. This can simplify and isolate compounding effects of other items in your scene or prefab.

Here's an example of putting in a laser-focused Debug.Log() and how that can save you a TON of time wallowing around speculating what might be going wrong:

https://forum.unity.com/threads/coroutine-missing-hint-and-error.1103197/#post-7100494

When in doubt, print it out!(tm)

Note: the

print()

function is an alias for Debug.Log() provided by the MonoBehaviour class.

 

You have to save the file for your changes to apply. At the top where you see the tabs for the files in VS Code, the giant white dot means that file hasn't been saved.

 

Can someone please make a code for move and jump please i have watched a lot of tutorials and i cant even make a single object move

 

Review the two steps necessary. We know it works in the tutorials so there's no point in us sending you something because that wouldn't work for you either, because you're obvious not using it correctly.

Take a deep breath and start here:

Tutorials and example code are great, but keep this in mind to maximize your success and minimize your frustration:

How to do tutorials properly, two (2) simple steps to success:

Step 1. Follow the tutorial and do every single step of the tutorial 100% precisely the way it is shown. Even the slightest deviation (even a single character!) generally ends in disaster. That's how software engineering works. Every step must be taken, every single letter must be spelled, capitalized, punctuated and spaced (or not spaced) properly, literally NOTHING can be omitted or skipped.

Fortunately this is the easiest part to get right: Be a robot. Don't make any mistakes.
BE PERFECT IN EVERYTHING YOU DO HERE!!

If you get any errors, learn how to read the error code and fix your error. Google is your friend here. Do NOT continue until you fix your error. Your error will probably be somewhere near the parenthesis numbers (line and character position) in the file. It is almost CERTAINLY your typo causing the error, so look again and fix it.

Step 2. Go back and work through every part of the tutorial again, and this time explain it to your doggie. See how I am doing that in my avatar picture? If you have no dog, explain it to your house plant. If you are unable to explain any part of it, STOP. DO NOT PROCEED. Now go learn how that part works. Read the documentation on the functions involved. Go back to the tutorial and try to figure out WHY they did that. This is the part that takes a LOT of time when you are new. It might take days or weeks to work through a single 5-minute tutorial. Stick with it. You will learn.

Step 2 is the part everybody seems to miss. Without Step 2 you are simply a code-typing monkey and outside of the specific tutorial you did, you will be completely lost. If you want to learn, you MUST do Step 2.

Of course, all this presupposes no errors in the tutorial. For certain tutorial makers (like Unity, Brackeys, Imphenzia, Sebastian Lague) this is usually the case. For some other less-well-known content creators, this is less true. Read the comments on the video: did anyone have issues like you did? If there's an error, you will NEVER be the first guy to find it.

Beyond that, Step 3, 4, 5 and 6 become easy because you already understand!

Finally, when you have errors, don't post here... just go fix your errors! Here's how:

Remember: NOBODY here memorizes error codes. That's not a thing. The error code is absolutely the least useful part of the error. It serves no purpose at all. Forget the error code. Put it out of your mind.

The complete error message contains everything you need to know to fix the error yourself.

The important parts of the error message are:

- the description of the error itself (google this; you are NEVER the first one!)
- the file it occurred in (critical!)
- the line number and character position (the two numbers in parentheses)
- also possibly useful is the stack trace (all the lines of text in the lower console window)

Always start with the FIRST error in the console window, as sometimes that error causes or compounds some or all of the subsequent errors. Often the error will be immediately prior to the indicated line, so make sure to check there as well.

Look in the documentation. Every API you attempt to use is probably documented somewhere. Are you using it correctly? Are you spelling it correctly?

All of that information is in the actual error message and you must pay attention to it. Learn how to identify it instantly so you don't have to stop your progress and fiddle around with the forum.

The purpose of this forum is to assist people who are ready to learn by doing, and who are unafraid to get their hands dirty learning how to code, particularly in the context of Unity3D.

This assumes you have at least written and studied some code and have run into some kind of issue.

If you haven't even started yet, go check out some Youtube videos for whatever game design you have in mind. There are already many examples of the individual parts and concepts involved, as there is nothing truly new under the sun.

If you just want someone to do it for you, you need go to one of these places:

https://forum.unity.com/forums/commercial-job-offering.49/

https://forum.unity.com/forums/non-commercial-collaboration.17/

https://livehelp.unity.com/?keywords=&page=1&searchTypes=lessons